T TYPE BABY DIAPER PRODUCTION LINE - 1



T TYPE BABY DIAPER PRODUCTION MACHINE

Main Structural Devices:

--> Cell mill
--> Suction fan
--> Drum forming unit
--> SAP applying unit
--> Compacting unit
--> Side wing applying unit
--> Side tape applying unit
--> Top sheet lamination unit
--> Back sheet lamination unit (optional)
--> ADL applying unit
--> Elastic ribbon unwinding unit
--> Elastic waist applying unit
--> Front tape applying unit
--> Roller convey unit
--> Diaper folding unit
--> Diaper outputting unit
--> Safety door

Main Features:

1) Touch screen for man-machine conversation
2) Inverter governor is adopted for main machine drive, PLC control
3) Cell mill
4) Drum forming
5) SAP dosing unit
6) Active unwinding and splicing units are adopted for raw material
7) Current conducting ring is adopted for the heating rotary bodies
8) Auto detects & alarm for material exhausted, auto reject for waste caused by splicing
9) Phase can be adjusted during operation
10) Square supports are adopted for frame of rotary bodies & cutters
11) Diaper tri-folding or bi-folding

Main Technical Parameters:

--> Supply: 3 phases 380V 50Hz
--> Power: 220Kw (Glue applicator & air compressor are excluded)
--> Wastage: ≤ 4%
--> Production Speed: 300pcs/min
--> Outside Dimension(m): 30×6×5 (L×W×H)

Baby Diaper


T TYPE BABY DIAPER PRODUCTION LINE - 2



T Type Baby Diaper Production Line

Main Structural Devices:

1) Cell mill
2) Dust collecting unit
3) Drum forming unit
4) SAP applying unit
5) Compacting unit
6) Inner cutting unit
7) Side wing applying unit
8) Side tape applying unit
9) Top sheet lamination unit
10) Back sheet lamination unit (optional)
11) ADL applying unit
12) Elastic ribbon unwinding unit
13) Elastic waist applying unit
14) Front tape applying unit
15) Roller convey unit
16) Arc cutting unit
17) Diaper folding unit
18) Diaper outputting unit
19) Safety door

Main Features:

--> Touch screen for man-machine conversation
--> Inverter governor adopted for main machine drive, PLC control
--> Cell mill
--> Drum forming
--> SAP dosing unit
--> Active unwinding and splicing units are adopted for raw material
--> Current conducting ring is adopted for the heating rotary bodies
--> Auto detects & alarm for material exhausted, auto reject for waste caused by splicing
--> Phase can be adjusted during operation
--> Square supports are adopted for frame of rotary bodies & cutters
--> Protective door is equipped
--> Diaper tri-folding or bi-folding

Main Technical Parameters:

--> Supply: 3 phases 380V 50Hz
--> Power: 190Kw (Glue applicator & air compressor are excluded)
--> Wastage: ≤ 4%
--> Production Speed: 300pcs/min
--> Outside Dimension(m): 30×6×2.7 (L×W×H)

Baby Diaper